Removing The Display Latch - Dell XFR D630 Service Manual

1. Follow the instructions in
2. Install the display panel (see
3. Install the display bezel (see
4. Install the display assembly (see
NOTE: Ensure the display cable grommets are properly installed by following the instructions
provided at the beginning of
10.9

Removing the Display Latch

CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User's Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
NOTE: Replacing the display latch does not require removing the display assembly from the
base.
NOTE: Replacement keyboard/palm rest overlays are not included in the latch service kits.
1. Follow the procedures in
2. Turn the computer top-side up, and then open the display all the way (160 degrees).
3. Remove the display bezel (see
4. Remove the 2 latch screws and washers.
Page 67 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
B efore You Begin.
1 3 3 H
I nstalling the Display Panel).
1 3 4 H
I nstalling the Display Bezel).
1 3 5 H
I nstalling the Display Assembly)
1 3 6 H
I nstalling the Display Assembly.
1 3 7 H
B efore You Begin.
1 3 8 H
R emoving the Display Bezel).
1 3 9 H
Revision A01