Dell XFR D630 Service Manual page 54

1
2
1 Screws (4)
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the
memory-module securing clips.
3. If you are replacing a memory module, ground yourself and remove the existing module:
a. Use your fingertips to carefully spread apart the securing clips on each end of the
memory module connector until the module pops up.
b. Remove the module from the connector.
1 securing clips (2)
NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.
4. Ground yourself and install the new memory module:
a. Align the notch in the module edge connector with the tab in the connector slot.
Page 54 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
2 Memory module cover 3 Memory module compartment
2 memory module
3
Revision A01