Dell XFR D630 Service Manual page 100

2. Complete the seating of the system board and again verify the cables are in the correct
positions, and the 3 gaskets for the power port, rear USB port and side USB port are correctly
positioned.
3. Secure the system board using the 4 M2.5 x 5-mm screws (labeled with silver triangles on the
system board).
4. Reconnect the cables near the WLAN card and the modem connector to the system board.
5. Reconnect the fan cable to the system board.
6. Install the processor (see
7. Install the processor thermal-cooling assembly (see
Assembly).
8. Install any smart cards or smart card blanks into the smart card slot.
9. Install the PC card reader (see
10. Install the speaker (see
11. Install any wireless communication cards (see
Network (WLAN) Cards,
12. Install the palm rest (see
13. Install the memory module (see
14. Install any media bay devices (see
15. Install the keyboard (see
16. Install the hinge cover (see
17. Install the HDD (see
Page 100 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
I nstalling the Processor).
2 7 8 H
I nstalling the PC Card Reader Cage).
2 8 0 H
I nstalling the Speaker).
2 8 1 H
I nternal Card with Bluetooth® Wireless Technology).
2 8 4 H
I nstalling the Palm Rest).
2 8 5 H
M emory).
2 8 6 H
X Bay Devices).
2 8 7 H
K eyboards).
2 8 8 H
I nstalling the Hinge Cover).
2 8 9 H
H ard Drive).
2 9 0 H
I nstalling the Processor Thermal-Cooling
2 7 9 H
W WAN, FCM & SIM Cards,
2 8 2 H
Ensure cables
are properly
routed.
W ireless Local Area
2 8 3 H
Revision A01