Table of Contents
Advertisement
1. Follow the instructions in
"Preparing to Work Inside the
2. Turn the computer over, loosen the captive screw (labeled "C") in the modem/Mini PCI card cover, and lift the cover away from the computer.
1 captive screw
2 modem/Mini PCI card cover
1 modem cable
2 M2 x 3-mm screws
3 modem cable connector
4 pull-tab
3. Remove the two M2 x 3-mm screws securing the modem to the system board, and set them aside.
4. Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board and disconnect the modem cable.
Installing the Modem
1. Connect the modem cable to the modem.
NOTICE:
The modem cable connector is keyed for correct insertion; do not force the connection.
2. Align the modem with the screw holes, and press the modem into the connector on the system board.
3. Install the two M2 x 3-mm screws to secure the modem to the system board.
4. Replace the cover and tighten the captive screw.
Mini PCI Card
Computer."
Advertisement
Table of Contents
