Diskette Removal; Cd Loading (Multimedia Models) - NEC PowerMate V486 Series Manual

Hide thumbs Also See for PowerMate V486 Series:
Table of Contents

Advertisement

Diskette Removal

To remove a diskette from the diskette drive, press the
release button on the 3 1/2-inch drive.
from the diskette drive when the diskette drive lamp
is lit. To do so can damage both the data on the
diskette and the drive.
Do not turn off the system power while the diskette
is being accessed.
Do not reset the system (except as a last resort)
when the diskette drive is in use.

CD Loading (multimedia models)

To insert a CD into the CD-ROM reader, follow these
steps.
Press the eject/retract button. A CD tray will emerge
1.
from the reader door.
Remove the CD from its protective case. Hold the CD
2.
by its center hole and outer edges to avoid touching the
its surface.
3.
Place the CD, printed side up, into the circular area of
the tray (see the following figures).
!
CAUTION: Do not remove a diskette
Using Your Computer 1-33

Advertisement

Table of Contents
loading

Table of Contents