System Security Options - NEC PowerMate V486 Series Manual

See the following table for a description of the security
features you can select. Use the legend keys to make your
selections and exit to the Main Menu.
FEATURE OPTIONS
Supervisor Password Disabled (default)
Enabled
Set Supervisor Up to seven
Password alphanumeric
characters
User Password Disabled (default)
Enabled
Set User Password Up to seven
alphanumeric
characters
Password on Boot Disabled (default)
Enabled
Diskette Access User (default)
Supervisor
2-18 Setting System Parameters

System Security Options

DESCRIPTION
Must set to Enabled to set a
Supervisor password.
Pressing
box for entering the supervisor
password. This password gives
FULL access to Setup menus.
Must set to Enabled to set a User
password.
Pressing
dialog box for entering the user
password. This password gives
RESTRICTED access to Setup
menus. Requires the prior setting
of a Supervisor password.
Enabled requires a password on
boot (cold boot only — no
password required for warm boot).
Requires the prior setting of a
Supervisor and/or User password.
If disabled, password(s) are
required for entering Setup but
are not required for booting.
If a Supervisor password is set
and this option is disabled, the
BIOS boots without asking for a
password.
Supervisor setting restricts
the use of diskette drives to a
supervisor. Requires setting the
Supervisor password.
displays a dialog
Enter
displays the
Enter