NEC PowerMate V486 Series Manual page 43

2. Save your work. See the documentation that comes with
your application program.
3. Exit the application program.
If you are in Windows, exit the Program Manager by
double clicking on the upper left block. Select "OK" at
the prompt to exit Windows.
4. Make sure that the hard disk and diskette drives are not
in use. A lit hard disk lamp or diskette drive busy lamp
indicates that a drive is in use.
Turn off power to your monitor.
5.
6. Power off the system by pressing the system unit power
button.
ished running before powering off the system.
Unless absolutely necessary, never power off the
system when the system power lamp is amber or
when the hard disk lamp or diskette drive busy lamp
is lit. Information on the hard disk or diskette might
be lost or damaged.
1-30 Using Your Computer
!
CAUTION: Wait until a program is fin-