Battery Replacement - NEC PowerMate V486 Series Manual

Hide thumbs Also See for PowerMate V486 Series:
Table of Contents

Advertisement

BATTERY REPLACEMENT

A 3-volt lithium battery in your computer maintains system
configuration information. In the event that this CMOS
battery fails to maintain system configuration information,
replace the battery.
Use a Panasonic/Rayovac BR2325 battery available at
most local stores.
the system board causes the computer to lose
system configuration information. If you can, run
Setup and print out or write down your system
configuration settings. Then you can restore your
system to its current settings.
it is incorrectly replaced or improperly discarded.
Use only the same battery or an equivalent type
recommended by the manufacturer when replacing
the battery.
Lithium acts as a catalyst when exposed to water
and causes spontaneous combustion on contact.
Discard used batteries according to the manufac-
turer's instructions.
If you need to replace the battery, follow these steps:
Turn off and unplug the system unit and any external
1.
option connected to it.
!
CAUTION: Removing the battery from
!
WARNING: The battery can explode if
Solving Problems 7-7

Advertisement

Table of Contents
loading

Table of Contents