Fax/Modem (Fax/Modem Models) - NEC PowerMate V486 Series Manual

Fax/Modem (fax/modem models)

Use the following procedure to connect the fax/modem to a
telephone line.
NOTE: A modular telephone cable comes with
multimedia fax/modem models.
1. Turn off and unplug the system unit and any external
option connected to the system unit.
2. Disconnect your telephone cable from the phone jack on
the wall.
NOTE: The fax/modem requires an analog tele-
phone line. The fax/modem does not operate on
a digital line — for example, Public Branch
Exchanges (PBX).
Connect the modular telephone cable that comes with
3.
your system to the telephone jack on the wall and to the
fax/modem jacks shown in the following figures.
Connect your telephone to the other fax/modem jack.
4.
NOTE: You do not need to connect the telephone
for the fax/modem to operate.
Adding Options 5-83