Advanced Menu; Integrated Peripherals Menu - NEC PowerMate V486 Series Service Manual

2-20 Setup and Operation
Parameters
Numlock
Keyboard auto-
repeat rate
Keyboard auto-
repeat delay
Key Click

Advanced Menu

Accessing the Advanced menu might require a Supervisor password. Selecting "Ad-
vanced" from the menu bar on the Main Menu displays a menu with the following options:
n
Integrated Peripherals
n
Parity
n
Large Disk Access Mode.
The following sections describe Advanced menu options.

Integrated Peripherals Menu

Select "Integrated Peripherals" menu on the Advanced Menu to configure the connections
between the system processor and the I/O ports (serial port 1, serial port 2, and the printer
port), the diskette drives, and hard disk controllers.
Table Section 2-6 Numlock Parameters
Options
Auto (default)
On
Off
Fast (default)
Medium
Slow
1/4 sec
1/2 sec (default)
3/4 sec
1 sec
Enabled
Disabled (default)
CAUTION: Setting items in this menu to incor-
rect values can cause the system to malfunction.
NOTE: A Supervisor password might be re-
quired to select parameters from the Integrated
Peripherals menu.
Description
On or Off turns NumLock on or off at bootup. Auto
turns NumLock on if it finds a numeric key pad.
Sets the delay time after the key is held down and
before it begins to repeat the keystroke.
Turns audible key click on or off.