COM3, 3E8h
COM4, 2E8h
Serial Port 2 IR Mode
The Serial Port 2 IR Mode field allows you to dedicate
Serial Port 2 for Infra-red applications. This field can be
either "Enabled" or "Disabled." The default is "Disabled."
Parallel Port Address
The parallel ports may be "Auto" detected or "Disabled."
The default is "Auto." When "Auto" is selected, the first
free LPT port is assigned regardless of what is selected. The
parallel port address options are as follows.
Disabled
LPT3, 3BCh
LPT1, 378h
LPT2, 278h
Auto
Parallel Port Mode
The Parallel Port Mode field options are as follows.
Compatible sets the parallel port to the standard AT
compatibility.
Bi-directional (default)
input/output mode only.
ECP
Port (ECP) mode.
EPP
Port (EPP) mode.
sets the parallel port to
sets the parallel port to the Enhanced Capabilities
sets the parallel port to the Enhanced Parallel
NEC Drivers and Utilities 4-17