Ide Support; Super I/O Controller; Serial Port - NEC Direction SP User Manual

Hide thumbs Also See for Direction SP:
Table of Contents

Advertisement

T
Shielded (high speed) cable required to connect USB
peripheral devices
T
Supports up to 127 physical devices
NOTE
Class B requirements to connect any USB device.

IDE Support

Two independent bus mastering PCI IDE interfaces support
Fast PIO Modes 1 throuhg 4, Fast PIO Mode 3/DMA1,
Fast PIO Mode 4/DMA2, ATA-33 (Ultra DMA/33)and
ATAPI devices.
The BIOS supports Logical Block Addressing (LBA) and
Extended Cylinder Head Sector (ECHS) translation modes.
The IDE device transfer rate and translation mode are
automatically detected.

Super I/O Controller

SMC FDC37M707 Super I/O Controller is an ISA Plug
and Play compatible, multifunction device that provides the
following features:
T
One serial port
T
One parallel port with ECP and EPP support
T
Diskette drive controller
T
Keyboard and mouse controller.

Serial Port

T
External 9-pin D-sub serial port connector
T
NS16C550-compatible UART supporting data transfers
up to 115.2 Kbits per second
B-8 System Specifications
Use shielded cable that meets the FCC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direction sp e-series

Table of Contents