1/2-Inch Hard Disk Drive Removal - NEC PowerMate V486 Series Service Manual

3 1/2-inch Hard Disk Drive Removal

Use the following procedure to remove the 3 1/2-inch hard disk drive.
1. Remove the top cover as previously described.
2. Unplug the hard disk drive power cable and signal cable from the hard disk drive.
Figure Section 6-12 3 1/2-Inch Hard Disk Drive Cables
NOTE: When reinstalling the drives, note that
all power cables are keyed to fit only in the cor-
rect position.
Minitower Repair 6-13