SMC Networks WUSB32 - annexe 2 Manual page 33

Getting Started with the Configuration Manager
Services
Summary
28
This table displays the status of various services that the ADSL
Barricade performs to help you manage your network. A green
check mark indicates that the service is active and a red X indicates
that it is inactive.
[NAT] : to translate private IP addresses to your public IP address
(Configuring Network Address Translation).
[IP Filter] : to set up the filtering rules that accept or deny incoming
or outgoing data (Configuring IP Filters and Blocking Protocols).
[RIP] : to enable router-to-router communication (Configuring the
Routing Information Protocol).
[DHCP Relay] : to enable dynamic assignment of IP information
from your ISP to your computers (Configuring Dynamic Host
Configuration Protocol).
[DHCP Client] : to enable dynamic assignment of IP information
from your ISP or another computer on your network to the device's
LAN port (Configuring the LAN Ports).
[DHCP Server]: to enable dynamic assignment of IP information
from the device's built-in DHCP server to your LAN computers
(Configuring Dynamic Host Configuration).
[IGMP] : to enable message forwarding from external sources such
as your ISP, based on Internet Group Management Protocol
(not configurable).