SMC Networks WUSB32 - annexe 2 Manual page 122

Configuring IPoA Interfaces
2. Select the next available interface name from the
[IPoA Interface:] drop-down list.
3. In the [Conf. IP Address:] and [Netmask:] fields, type the
address and mask that what you want to assign to the IPoA
interface. If you enable the DHCP option, the IP address you
enter here will serve as a requested address. The remote
computer may assign another address if necessary.
4. From the [Interface Sec Type:] drop-down list, select the level of
firewall security for the interface ([Public], [Private] or [DMZ].
5. In the [RFC 1577:] field, click the [Yes] radio button if the
interface complies with the IETF specification RFC 1577.
Otherwise click the [No] radio button, then click [Add].
6. If you want the IPoA interface to serve as the default route
for your LAN, click the [Enable] radio button in the [Default
Route:] field.
7. In the [Gateway IP Address:] field, enter the address
of the Internet computer to contact to gain initial access
to the Internet.
8. Select the Lower Interface from the [Lower Interface:]
drop-down list.
9. Click [Submit]. A [Confirmation] page will appear to confirm
your changes.
10. Click [Close] to return to the [IP over ATM (IPoA) Configuration]
page and view the new interface in the table.
11. Click the [Admin] tab. Click [Commit & Reboot] in the task bar.
12. Click [Commit] to save your changes to the permanent
memory.
122