Deleting A Bridge Interface - SMC Networks WUSB32 - annexe 2 Manual

4. Click [Bridging:] and [Enable] the radio button to turn on
bridging.
5. Click [Submit].
6. A page will briefly display to confirm your changes, and will
return you to the [Bridge Configuration] page.
7. Click the [Admin] tab. Click [Commit & Reboot] in the task bar.
8. Click [Commit] to save your changes to the permanent
memory.

Deleting a Bridge Interface

To make an interface non-bridgeable, display the [Bridge
Configuration] page and click
to delete. Click [OK] to confirm the deletion. The interface remains
defined in the system, but is no longer capable of performing
bridging.
Deleting a Bridge Interface
next to the interface you want
127