SMC Networks WUSB32 - annexe 2 Manual page 175

•
My LAN PCs cannot display web pages on the Internet
Verify that the DNS server IP address specified on the PCs
o
is correct for your ISP, as discussed in the item above. If you
specified that the DNS server be assigned dynamically from
a server, then verify with your ISP that the address configured
on the ADSL Barricade is correct. Then you can use the ping
utility to test connectivity with your ISP's DNS server.
Configuration Manager Program
•
I forgot/lost my Configuration Manager user ID
or password
If you have not changed the password from the default, try
o
using smc/smcadmin as the user ID and password. Otherwise,
you can reset the device to the default configuration by
pressing the [Reset] button on the Rear Panel of the device
three times (using a pointed object such as a pen tip). Then
type the default User ID and password shown above.
Warning: Resetting the device removes the custom settings
•
I cannot access the Configuration Manager program
from your browser
Use the ping utility, discussed in the following section, to check
o
whether your PC can communicate with the ADSL Barricade's
LAN IP address (by default 192.168.1.1). If it cannot, check
the Ethernet cabling. Verify that you are using Internet Explorer
V5.0 or later, or Netscape Navigator v6.1 or later. Support
for Javascript® must be enabled in your browser. Support for
Java® may also be required. Verify that the PC's IP address
is defined as being on the same subnet as the IP Address
assigned to the LAN port on the ADSL Barricade
and returns all settings to their default values.
Troubleshooting
177