SMC Networks WUSB32 - annexe 2 Manual page 42

•
If you enabled the DHCP service, the ADSL Barricade will
initiate a request for an IP address from your LAN's DHCP
server. If a different IP address is assigned than the one
that was previously configured, your current connection
will be terminated.
4. Reconfigure your PCs, if necessary, so that their IP addresses
place them in the same subnet as the new IP address of the
LAN port. See Quick Start, Configuring Your Computers on
page 9 for instructions.
5. Log into [Configuration Manager] by typing the new IP
address in your Web browser's address/location box.
6. If the new settings work properly, click the [Admin] tab,
and then click [Commit & Reboot] in the task bar.
7. Click [Commit] to save your changes to the permanent
memory.
Configuring the LAN Port IP Address
37