Step 2. Connect The Ethernet Cable; Step 3. Attach The Power Connector; Step 4. Power Up Your Systems; Configuring Your Computers - SMC Networks WUSB32 - annexe 2 Manual

Step 2. Connect the Ethernet cable

If you are connecting a LAN to the ADSL Barricade, attach one
end of a provided Ethernet cable to a regular hub port and the
other to the Ethernet port on the ADSL Barricade. If you are
using the ADSL Barricade with a single computer and no hub,
you must use an Ethernet cable to attach the PC directly to the
device. The cable is wired differently than the cable you would
use to connect to a hub.

Step 3. Attach the power connector

Connect the AC power adapter to the Power connector on
the back of the device and plug in the adapter to a wall outlet
or power strip.

Step 4. Power up your systems

Turn on and boot up your computer(s) and any LAN device
such as hubs or switches.

Configuring Your Computers

This section provides instructions for configuring the Internet
settings on your computers to work with the ADSL Barricade.

Before you begin

By default, the ADSL Barricade automatically assigns all required
Internet settings to your PCs. You need only to configure the PCs
to accept the information when it is assigned.
Configuring Your Computers
9