Rebooting The Device Using Configuration Manager - SMC Networks WUSB32 - annexe 2 Manual

Getting Started with the Configuration Manager

Rebooting the device using Configuration Manager

To reboot the device, display the [Commit & Reboot] page,
select the appropriate [Reboot Mode:] from the drop-down list,
and then click [Reboot].
You have three options when rebooting.
Option
Reboot from Last
Configuration
Reboot from Backup
Configuration
Reboot from Default
Configuration
Warning:
32
This option is to reboot the device using the current
settings in the permanent memory, including any changes
you have just committed.
This option is to reboot the device using settings stored
in the backup memory. These are the settings that were
effective before you committed new settings in the current
session.
This option is to reboot the device to the default settings
provided by your ISP or the manufacturer. Choosing this
option erases any custom settings.
Do not reboot the device using the [Reset] button
on the Rear Panel of the ADSL Barricade to activate
new changes. This button resets the device settings
to the factory default values. Any custom settings will
be lost.
Description