Configuring The Atm Virtual Circuit - SMC Networks WUSB32 - annexe 2 Manual

Configuring the ATM Virtual Circuit

The ATM VC Configuration table displays the following fields
(contact your ISP to determine these settings):
Field
Interface
Vpi
Vci
Mux Type
Max Proto
per AAL5
Action (s)
98
Description
This field indicates the name of the lower-level interface on which
this VC operates. The low-level interface names are preconfigured
in the software and identify the type of traffic that can be
supported, such as data or voice. Internet data services typically
use an aal5-type interface.
These settings identify a unique ATM data path for communication
between your ADSL Barricade and your ISP.
If you are using an AAL5-type of interface, this setting indicates
the number of higher-level interfaces that the VC can support
(the higher level interfaces can be PPP, EoA, or IPoA interfaces).
Contact your ISP to determine which connection protocol(s) they
require.
This field displays the icons you can click on to modify (
page 100) and delete (
delete an ATM interface if another protocol such as PPP, EoA, or
IPoA has been defined to operate over the ATM interface. Delete
the higher-level interface first, and then delete the ATM interface.
) the associated interface. You cannot
— see