Managing The Black List - SMC Networks WUSB32 - annexe 2 Manual

Configuring Firewall Settings

Managing the Black List

If data packets are received that violate the firewall settings or any
of the IP filter rules, then the source IP address of the offending
packets can be blocked from such accesses for a specified period
of time. You can enable or disable use of the black list using the
settings described above. The source computer remains on the
black list for the period of time that you specify.
To view the list of currently blacklisted computers, click [Black List]
at the bottom of the [Firewall Configuration] page. The [Firewall
Blacklisted Hosts] page appears, as shown in Figure 46.
The table displays the following information for each entry.
Field
Host IP Address
Reason
IPF Rule ID
Action(s)
132
Figure 46. Firewall Blacklisted Hosts Page
Description
This is the IP address of the computer that sent the
packet(s) that caused the violation
This is a short description of the type of violation. If the
packet violated an IP filter rule, the custom text from the
[Log Tag] field will display. (See Creating IP Filter Rules
on page 137.)
If the packet violated an IP filter rule, this field will display
the ID assigned to the rule.
This field displays an icon (
the entry from the list, if you want it to be removed prior to
its automatic timed expiration.
) you can click on to delete