RoboLabs Vortex Popcorn Robopop 60 Instruction Manual page 24

6.2 Weekly cleaning
1. Empty the corn bins and salt bin.
2. Remove wing-screws that fix the corn bins; remove the bins by pulling them out.
3. Wipe internal surfaces of corn bins with a soft clean cloth dampened with mild soap;
then remove soap residues with a cloth dampened with water. Let it dry.
4. Wipe corn augers with dampened cloth.
5. Take out the sifter (Fig. 3 pos. 1) from rollers (Fig. 3 pos. 2 and 7). To do this, first
remove the salt supply tube, then lift the sifter a bit, and take this out.
6. Remove internal blades of the sifter, by unscrewing wing screws. Wash sifter and
blades with mild soap in order to remove grease and dust. Rinse with water, let it dry.
Mount the blades back to the sifter.
7. Idle and drive rollers (Fig. 3 pos. 2 and 7) have two wheels each. Clean the wheel
surface with a stiff brush or Scotch-Brite sponge, to remove grease and dust formation.
Failing to do so might lead to sifter slipping, and eventually to chamber clogging.
8. Clean internal surfaces of sifter cabinet with a cloth dampened with mild soap. Remove
soap residues with a cloth dampened with water. Let it dry.
9. Put the sifter back on the rollers. Make sure the rims of the sifter fit the wheels. Make a
full round by driving the sifter with a hand.
10. Put the bins back on their places, fix with wing-screws.
23