RoboLabs Vortex Popcorn Robopop 60 Instruction Manual page 18

Popping temperature affects the way how popcorn pops; its shape and size. Too high values
lead to smaller popcorn. Too low values lead to reduced productivity, improperly popped
kernels, and chamber clogging.
It is recommended to choose popping temperature set value for Butterfly from 200...215 °C
range; and for Mushroom from 210...225 °C range.
Due to thermal lag, it takes few minutes to see the result once the temperature has been
changed.
5.3 Operation screen
During popping mode, the following screen appears:
Left upper corner reads the current temperature in the chamber.
PAUSE button used to switch the machine to pause mode. Pause mode is intended to put
production process on hold for some time, or to change the program. DO NOT use pause mode
to change full popcorn cart, since this will affect quality of the end product. It is recommended
to have long sessions for each program, without interruption of corn feeding.
Sprocket icon button in the righ upper corner is used to access program settings, general
settings, or temperature graph screen. To enter those screens, press and hold the button for 1
second, then press MODIFY button, and after this type '2325' or '6666' or '3333' password,
respectively, and finally press ENTER.
TURN OFF button used to switch the machine to cooling mode.
5.4 Temp graph screen
Temperature graph screen represents the temperature in the chamber in real time, which is
useful for diagnostic purposes:
17