RoboLabs Vortex Popcorn Robopop 60 Instruction Manual page 10

3 Commissioning
Not grounded machine can cause electric shock. Power outlet MUST HAVE proper grounding
•
to avoid electric shock.
• Wall receptacle MUST be installed by a qualified electrician.
If supply cord damaged, it MUST be replaced by manufacturer, service agent, or a skilled
•
person in order to avoid hazard.
• DO NOT connect the machine to voltage inverters of any kind.
• Installation, assembling, and electric connections must be performed by a qualified
technician.
3.1 Ambient requirements
This machine is designed to be operated indoors at the ambient temperature from +5 °C to
+40 °C (+41 °F to +104 °F) and relative humidity not more than 45% at 40 °C (104 °F) while
using at altitudes not exceeding 1000 m over the sea level. The temperature decreasing is
related to RH increasing, for example, 90% of RH at 20 °C (68 °F). This machine MUST NOT be
exposed to precipitations of any kind (rain, snow and so on).
A ventilation hood measuring at least 800x800 mm must be provided above the machine, with
a minimum capacity of 750 cu.m/h.
3.2 Installation
1. Unpack the machine carefully and keep packaging for future use.
2. Check the delivery set.
3. Put the machine on a flat, even, clean surface.
4. Lock all four swivel casters.
5. Remove protective film where applicable.
6. Wipe all surfaces with a clean cloth dampened with a mild soap. Then remove soap
residues with a cloth dampened with water. Let it dry.
7. Assemble popcorn carts from the delivery set.
8. Put oil pump inside the oil pump cabinet, connect the pump's hose to quick release
connector and the pump cable to the corresponding socket (see Fig. 4).
9. Inspect the supply cord for any damages.
9