RoboLabs Vortex Popcorn Robopop 60 Instruction Manual page 13

4. Press START push button on the control panel. Wait until start screen appears:
5. Press BUTTERFLY or MUSHROOM button on the screen, program setting screen
appears:
6. ATTENTION! If no button pressed, the machine will proceed to heating stage
automatically in 15 seconds. After this moment you won't be able to change parameters
until machine switches to popping mode.
7. If parameters need to be modified, press MODIFY button, type 2325 password, and
then press ENTER.
8. Change the parameters as needed.
9. The machine starts heating up, HMI screen reads 'HEATING'.
10. Once heated up, machine automatically switches to popping mode, HMI screen reads
'POPPING':
11. Note that when Butterfly program is activated, oil and salt are turned on with a delay
(see Settings section).
12