Troubleshooting - CanyCom CG 101 Operator's Manual

6

Troubleshooting

• If any malfunction or abnormal condition is found, immediately stop using the
machine and take an appropriate measure according to the Troubleshooting chart
below. If the malfunction or abnormal condition is not listed in the chart, or the
suggested measure does not solve the problem, consult with your CANYCOM
representative.
• Some corrective measures listed below require special knowledge and/or
equipment. Please contact your CANYCOM representative in such a case.
Area
Engine does not start,
or is difficult to start
Engine
Engine stalls.
Engine stops abruptly.
Idling is not stable.
Troubleshooting
Malfunction
Out of fuel.
Drive clutch lever is in
[ON] position
Engine switch is in
[STOP] position
Excessive fuel in the
engine.
Insufficient or wrong
oil.
Dirty or damaged
spark plug.
Other (other than the
above).
Out of fuel.
Out of fuel
Other (other than the
above).
Possible Cause
→Fill fuel.
→Move to [ON]
→Move to [ON]
→Wait a while and try
→Fill or change oil.
→Clean or replace the
→Follow the
→Fill fuel.
→Fill fuel.
→Please contact
→Please contact
-
-60-
Corrective Measure
position
position
starting again.
spark plug.
instructions in
"Starting" to restart.
If problem persists,
please contact
your CANYCOM
representative.
your CANYCOM
representative.
your CANYCOM
representative.
Ref.
Page 15
Page 17
Page 17
Page 38
Page 40
Page 16
Page 15
Page 15