CanyCom CG 101 Operator's Manual page 27

• Do not use this machine in the altitude above 1500m (4920ft.) in its original
configuration. This machine cannot perform adequately above that altitude.
Using this machine under such conditions may result in an accident or cause
damage to machine. If you need to use this machine above that altitude,
contact your CANYCOM representative.
• Scan around your surroundings and confirm the position of drive clutch lever
and cutting rotary clutch lever before start engine. Engine cannot start if drive
clutch lever is in [ON ] position.
Fuel Cock
Open
5509M-0402-010E
OFF
Drive Clutch Lever
5509M-0402-020E
Cutting Rotary
Clutch Lever
5509M-0402-080E
Operation
1. Check fuel amount and open fuel cock.
2. Make sure drive clutch lever is in [OFF]
OFF
position.
NOTE
• Engine cannot be started unless drive
clutch lever is in [ON] position.
3. Make sure cutting rotary clutch lever is in
OFF
[OFF] position.
-17-
4