Storage; Machine - CanyCom CG 101 Operator's Manual

5

Storage

• Fire hazard; do not store machine where there is a possiblity of ignition.
• Do not wash engine or control panel with running water; water may enter inside
and cause rust or damage.
• Clean machine before storage; dirt or foreign objects may freeze and cause
damage.
• Do not store machine in a humid, dusty, or hot place.

Machine

NOTE
• Rubber plates or resin covers may deteriorate by exposing under direct sunlight for
a long period.
1. Follow Maintenance Schedule and inspect each part of the machine. Maintain faulty
part. (Refer page 32)
2. Run engine at idle for 5 minutes.
3. Stop engine and turn throttle lever fully to [
4. Park machine on a concrete or a dry surface. Do not store machine in a humid, dusty or
where machine expose under direct sunlight.
5. Make sure shift lever is in [N (neutral)] and all other levers are in their [OFF] positions.
6. Turn fuel cock to [OFF]. If machine will not be in use for more than a month, drain fuel
from carbrator and fuel.
7. Apply oil or grease on the respective lubrication or grease points.
8. Clean exterior surface of machine by cloth contains oil and apply rust inhibiting coating
on a part where get rusty.
Maintenance
(slow)].
-58-