CanyCom CG 101 Operator's Manual page 43

Item
Engine shall start easily without making any
Starting
irregular noise.
Engine speed shall be set properly at idle
and at full throttle without a load. Engine
shall stay running smoothly.
Running
When accelerating engine, throttle lever shall
move smoothly, and engine shall accelerate
smoothly without stopping or knocking.
Warm up engine thoroughly, and observe
exhaust sound and gas from idle to fast
speed; exhaust sound shall be normal and
Exhaust
no smoke shall be observed.
There shall be no leak in exhaust system or
muffler.
Air cleaner case shall not be deformed or
cracked. Case lid and connecting air hose
Air Cleaner shall be firmly in place.
Cleaner element shall be in good shape
without damage or excessive dust.
Bolts and nuts fastening cylinder head,
intake and exhaust manifolds shall be tightly
fastened.
Fastners
* this may be skipped if there is no gas leak
found in these areas.
Valve clearance shall be correct.
* this may be skipped if there is no noise due
Valve
to incorrect valve clearance, and engine
Clearance
runs normally.
Compression shall be normal
* this may be skipped if running and exhaust
Compression
condition is normal at idle and under
acceleration.
Engine base shall be free of cracks or
deformation.
Engine Mount
Mounting bolts and nuts shall not be loose or
missing.
Maintenance
Description
-33-
Schedule
Note
√ √ √
Contact your CANYCOM
√
representative for
inspection.
√ √ √
√ √ √
√ √
√ √
√ √ √
√
√
√
√ √ √
√ √ √
5