Adjusting Handle Position; Driving; Starting - CanyCom CG 101 Operator's Manual

4

Adjusting Handle Position

5509M-0401-020E

Driving

Starting

• Always start and run engine in a well ventilated place. Otherwise exhaust cause
poisoning.
• Do not use this machine in temperatures above 40ºC or below -15ºC. This
machine cannot perform adequately in these temperature ranges. Using this
machine under such conditions may result in an accident or cause damage to
machine.
• In the winter or cold climate, warm up engine thoroughly before driving
machine. A cold engine delivers poor performance, which may result in an
accident. It also causes excessive wear.
• Do not use this machine in dusty places such as desert. Dust may clog
air cleaner or enter engine, which may reslt in loss of performance and an
accident. It also causes excessive wear.
Operation
Handle position can be adjusted to one of two
available positions to operator's figure.
1. Remove 4 bolts (2 on each side).
Bolt
2. Install handle bar to another position.
-16-