Advertisement
Cutting Height
Adjust Handle
5509M-0405-010E
Shift Lever
5509M-0405-020E
Throttle Lever
5509M-0404-040E
Operation
1.
Perform pre-start up inspection before use.
(Page 15)
2.
Adjust cutting height by turning cutting height
adjust handle. Turn it clock-wise to increase
cutting height. Turn it counter-clockwise to
decrease cutting height.
NOTE
• Adjust cutting height a little higher at first
and adjust cutting height depending on a
condition.
3.
Start engine.
4.
Move shift lever firmly into [1] or [2] position.
NOTE
• U s e fi r s t o r s e c o n d g e a r f o r m o w i n g
operation. Do not mow while travelling in
reverse.
5.
Move throttle lever to [ (fast)] position.
-29-
4
Advertisement
Need help?
Do you have a question about the CG 101 and is the answer not in the manual?
Questions and answers