Icom IC-706 MKII Instruction Manual page 48

/ SET MODE
E initial set mode items
" (confirmation beep)
A beep sounds each time a switch is pushed to con- are
firm it. This function can be turned OFF for silent
Confirmation beep ON
operation.
(default)
et 2 REEF " (band beep)
A beep sounds when an operating frequency enters ee c
2 HLUT GRE " (auto power OFF)
ey ge a =r
The auto power OFF function can be used to auto-
yr
fof
matically turn the transceiver OFF after a specified Auto power OFF
time of operation. This item can be set to 20 min., 40 deactivates. (default)
min., 60 min., or OFF.
Auto power OFF set to
20 min.
PEHE HOLE (peak hold) —
When the peak hold function is ON, the highest acti- pee eee
vated segment of the meter remains visible for 0.5 Peak hold ON Peak hold OFF
sec.; when OFF, the meter functions normally. (default)
if (display backlighting)
ste elz
a LLI
Display backlighting setto Display backlighting set to
high (default). low.
The function display backlighting can be set to high,
low or OFF to suit ambient lighting.
cat Hi LP "iP ik "i (voice synthesizer language)
When the optional UT-102 VOICE SYNTHESIZER UNIT İS E | L t
installed, you can select between English and
Japanese as the language.
Voice synthesizer functions Voice synthesizer functions
in English (default). in Japanese.
r SPEECH SFD (voice synthesizer speed)
When the optional UT-102 VOICE SYNTHESIZER UNIT İS a)
installed, you can select between faster or slower
synthesizer output. Voice synthesizer output Voice synthesizer output
is faster (default). is slower.
"| (S-level speech) oo
When an optional UT-102 SPEECH SYNTHESIZER UNIT mere ar Te
is installed, the synthesizer can be set to read out the Voice synthesizer reads out Voice synthesizer reads out
frequency/mode only, or both the frequency/mode both the frequency/mode the frequency/mode only.
and S-meter level.
and S-meter level (default).