Activation Operations; Zone-Address; Output - Panasonic WEB-SERVER II Technical Description

11. REMOTE OPERATIONS

11.2. ACTIVATION OPERATIONS

Press the Activation operations button to access a list of different activation operations.
A press on the Select button on each item will give the user a sub menu with the different output types or a
pop-up window with buttons to activate or de-activate.
The back-button will go back one level in the menu list, to the previous menu.

11.2.1. ZONE-ADDRESS

A specified alarm point (Zone-Address) can be activated, i.e. set in fire alarm mode.
Reset the fire alarm with the de-activate button or in the fire alarm list, like any other fire alarm, see
.
10.4.1. FIRE ALARM

11.2.2. OUTPUT

A sub menu for several types of outputs.
LOOP UNIT OUTPUT
A specified loop unit (Tech. No.), Output (0-2) can be activated / de-activated.
NOTE! In system EBL128 the tech.no. is "000" plus the COM loop address, for example 000123.
VOLTAGE OUTPUT (S)
A specified voltage Output (0-3) in a specified c.i.e. (00-29) can be activated / de-activated.
RELAY OUTPUT (R)
A specified relay Output (0-1) in a specified c.i.e (00-29) can be activated / de-activated.
EXPANSION BOARD OUTPUT
A specified output (0-7) on a specified 4581/4583 expansion board (0-5), in a specified c.i.e. (00-29), can
be activated / de-activated.
NOTE! 4583 has three outputs (0-2).
INTERLOCKING OUTPUT
An interlocking output can be activated / de-activated via a specified interlocking combination Area-Point.
46
TECHNICAL DESCRIPTION 1598 • DOCUMENT NUMBER: MEW01930 • REVISION: 4