Advanced Configuration; Chiptool; Formatting The Web Server - Panasonic WEB-SERVER II Technical Description

Hide thumbs Also See for WEB-SERVER II:

8. ADVANCED CONFIGURATION

In case of a failed download of new configuration, an incomplete or corrupted configuration might have been

downloaded into the Web-server, causing it to keep rebooting or loses communication.

If there´s no other way to get in contact with the Web-server, a solution is to try to recover the unit by

formatting the web-server using Chiptool.

Normally Chiptool will be able to detect the Web-server when connected to the same network. If the

Chiptool doesn´t detect the Web-server and it´s not shown in the list of units, it´s still possible to format it

using RS232 connected to PLC Com. The dialog for this is in menu Flash-> Serial gang program.

After formatting the unit using RS232, set the IP address, see

8.3. SET IP-ADDRESS

TECHNICAL DESCRIPTION 1598 • DOCUMENT NUMBER: MEW01930 • REVISION: 4

Table of Contents

Do you have a question about the WEB-SERVER II and is the answer not in the manual?

Fp-web2