Pre-Warning/Co-Incidence/Quiet/Delayed Alarm; Fault - Panasonic WEB-SERVER II Technical Description

10. EBLWEB
Press the Reset button in the reset column for a pop-up dialog for reset of alarm. (Requires login on User
level 2 or 3)
The pop-up dialog for reset of alarm gives two choices for alarm reset either reset the current alarm or reset
all alarms in the fire alarm list.

10.4.2. PRE-WARNING/CO-INCIDENCE/QUIET/DELAYED ALARM

In case of pre-warning, co-incidence alarm, quiet alarm, or delayed alarm, press on the pre-warning/co-
incidence alarm LED button or List button to view corresponding alarm list.
This list is separated into tab pages for respective pre-warning and alarm type.
The list is similar to the fire alarm list, see 4.4.1.

10.4.3. FAULT

In case of faults, press on the Fault LED button or the List button to view the fault list.
The Time (date & time), Tech.No, Zone/address (when applicable), Fault description (fault message) are
displayed. State (Serviced 7 Acknowledged / "Blank" = Neither Serviced nor Acknowledged).
Text = More info, such as alarm text if the fault is related to a detector etc. Place the pointer above the
information icon.
Link1 = hyperlink to open a web-camera, document, a drawing etc. for more information regarding the alarm
point.
Link2 = hyperlink to open a web-camera, document, a drawing etc. for more information regarding the alarm
point.
Press the Acknowledge button in the acknowledge column for pop-up dialog for acknowledgement of fault.
(Requires login on User level 2 or 3)
The pop-up dialog for acknowledgement of fault gives two choices for fault acknowledgement, either
acknowledge the current fault or acknowledge all faults in the fault list.
34
TECHNICAL DESCRIPTION 1598 • DOCUMENT NUMBER: MEW01930 • REVISION: 4