Configuration Of Eblweb; Web-Server; General Information; Unit Information - Panasonic WEB-SERVER II Technical Description

6. CONFIGURATION OF EBLWEB

6. CONFIGURATION OF EBLWEB
The EBLWeb is configured via EBLWin. The EBLWeb software, the configuration data and the site specific
data (SSD) will be downloaded to the web-server via TCP/IP, See EBLWin menu Tools.
All the EBLWeb related menu options and dialog boxes in EBLWin are described in the following chapters.

6.1. WEB-SERVER

To configure a web-server for the EBL-system, a web-server must be added to a c.i.e. (Control unit pop-up
menu, Add web-server). Up to five web-servers may be added to the EBL-system, with a limit of one web-
server per c.i.e.
Once added, a properties dialog box for the Web-server will be opened. More about each setting will be
described below. The properties dialog box can always be accessed by right-clicking at a web-server in the
EBLWin treeview, and select properties.

6.1.1. GENERAL INFORMATION

Since there is a limitation of the maximum numbers of web-servers for an EBL system, each web-server
must have a unique technical address (0-4). A default web-server Name is shown. The web-server name
is shown in the treeview of EBLWin.

6.1.2. UNIT INFORMATION

To be able to download a specific configuration to a specific web-server, the hardware ID (normally five
characters) is required to identify the web server unit. This ID can be found in the label on the backside of
Web-server II. (ID:12345)
11
TECHNICAL DESCRIPTION 1598 • DOCUMENT NUMBER: MEW01930 • REVISION: 4