8. ADVANCED CONFIGURATION
8.3. SET IP-ADDRESS
Set the IP address to suit the current network.
a) Right click on the current Web-server and select IP configuration to re-configure the IP-address.
This is needed to save the IP-configuration as a file into the Web-server (chip.ini), which is currently
using a temporary DHCP configuration.
b) Enter the IP-configuration in the pop-up window and press Config to save it.
Now Chiptool shall be able to find the Web-server with the new IP-setting. With the formatting done, it
should now be possible to use Web Config Tool to configure the Web-server.
TECHNICAL DESCRIPTION 1598 • DOCUMENT NUMBER: MEW01930 • REVISION: 4
27
Need help?
Do you have a question about the WEB-SERVER II and is the answer not in the manual?
Questions and answers