Table of Contents
Advertisement
TAPE PLAYBACK
OPERATION
TAPE/
REV MODE
MODE
MULTI
JOG
LOADING A TAPE
+ You can select a reverse mode to play back one or both sides.
* Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
tapes for playback.
EJECT
-™oOO000
-—~
To select a reverse mode
Each time the TAPE/REV MODE button is pressed, the reverse
mode changes.
Se seSs ec
To play one side only, select =.
To play from front side to back side once only, select cz.
To play both sides repeatedly, select C=).
13 ENGLISH
PLAYING BACK A TAPE
Load a tape.
1 Press the MODE bution repeatedly until "DOLBY
OFF" appears on the display. Then, turn the MULTI
JOG dial right or left to turn Dolby NR on or off to
match the playback tape within 10 seconds.
DONR
For tapes recorded with DOLBY NR, turn the dial so that
"DOLBY ON" is displayed. The DO NR indication also turns
on.
For tapes recorded without DOLBY NR, turn the dial so that
"DOLBY OFF" is displayed.
2 Press the <P button to start play.
Playback side of the tape
The tape counter indicates the tape
running length. (it disappears when
no tape is inserted.)
<1:
The side facing upward is being played (forward).
[>:
The side facing downward is being played (reverse).
To stop play, press the ll button.
:
To pause play, press the HI button. To resume play, press again.
To change the playback side, press the <> button in play or
pause mode.
To fast forward or rewind, press the <4 or
button in stop
mode.
Then press the ll button to stop the tape.
Press the TAPE/REV MODE button.
The power is turned on
and play of the loaded tape begins.
To set the tape counter to 0000
Press the I button in stop mode.
Advertisement
Table of Contents
