L2Tp Over Ipsec Application; Scenario Topology; Configuration Flow; Configuration Procedure - ZyXEL Communications ZYWALL USG 2000 Support Notes

1.3.4 L2TP over IPSec Application

1.3.4.1 Scenario topology

1.3.4.2 Configuration flow

Create object
Configure the default L2TP rule in IPSec VPN Gateway
Configure the default L2TP rule in IPSec VPN Connection
Configure the L2TP rule
Configure Policy Route for L2TP
Remote PC/NB L2TP Setup on WinXP or Win2K

1.3.4.3 Configuration Procedure

Create Object
Step 1. Switch to menu Object > Address, create two object for further VPN connection
setting.
L2TP_IFACE, HOST, 10.1.1.1
L2TP_HOST, HOST, 0.0.0.0
L2TP_Pool, Range, 192.168.2.1 ~ 192.168.2.10
Step 2. Switch to menu Object > User/Group, create one object for L2TP application.
L2TP_user/1234, Local user
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
USG 2000
62