ZyWALL USG 2000 Support Notes
in the "Synchronize from" option and set the auto synchronize interval. Then click the "Apply"
button to save the configuration.
Switch to ZyWALL > Maintenance > Log > View Log to check the log record.
Step6. Check the system status page. You will see that the Master ZyWALL USG 2000's
configuration has been synchronized to Backup ZyWALL USG 2000 and we can continue to
setup the remaining setting HA group in Backup HA, you can refer to use guide to do detailed
configuration.
After these steps, the Device HA configuration is done.
112
All contents copyright (c) 2008 ZyXEL Communications Corporation.