ZyXEL Communications ZYWALL USG 2000 Support Notes page 51

ZyWALL USG 2000 Support Notes
Tips for application:
1. Make sure both pre-shared key settings are the same in local and remote gateway.
2. Make sure both IKE proposal settings are the same in local and remote gateway.
3. Select the correct interface for the VPN connection.
4. The Local and Peer ID type and content must the opposite and not of the same content.
5. The Local Policy of ZyWALL USG 2000 should be 'dynamic single host with the value
0.0.0.0'. The VPN tunnel should be initialed from the remote host site.
51
All contents copyright (c) 2008 ZyXEL Communications Corporation.