3.2.1 Applying Zone-Based IDP to ZyWALL USG 2000
Here is an example:
To fulfill the above scenario, you will need three networks on P4, P5 and P6. Then you can
apply different IDP profiles to them.
Here are the steps:
1) Login the ZyWALL USG 2000 GUI and go to Network > Interface > Port role. Since we
are going to have three intra-networks in our scenario, we will make P5 and P6 another
two networks for DMZ and LAN2.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
163