ZyXEL Communications ZYWALL USG 2000 Support Notes page 188

FAQ
A. Device Management FAQ
A01. How can I connect to ZyWALL USG 2000 to perform administrator's tasks?
You can connect your PC to ZyWALL USG 2000 port 1 interface with Ethernet cable, which
is most left Ethernet port. You will get the IP address automatically from DHCP by default.
Connect to http://192.168.1.1
management. The default administration username is "admin", and password is "1234".
A02. Why can't I login into ZyWALL USG 2000?
There may have several reasons why you can't login to ZyWALL USG 2000:
1. The ZyWALL USG 2000 supports the following types of browsers. Check if you are
not using other type of browser.
IE 6.0 or above
Firefox 1.5.0 or above
Netscape 7.2 or above
2. To login ZyWALL USG 2000's GUI, it's mandatory to enable JavaScript and accept
cookies in your web browser. Check if you don't have them disabled in the web
browser. If you do, enable them.
3. To login ZyWALL USG 2000's GUI, a popup window function in web browser is used.
Check if you have the popup windows block enabled in the web browser. If so, please
disable the block in the web browser.
4. You may be entering wrong username or password.
5. You might have typed a wrong password for over 5 times. ZyWALL USG 2000 blocks
login from such an IP address for 30 minutes by default.
6. You can be connecting to ZyWALL USG 2000 from a WAN interface which is blocked
by default. If you don't want this block rule, go to GUI menu System > WWW to set
to accept the access from 'WAN' or from 'All'.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
using web browser to login ZyWALL USG 2000 for
188