ZyXEL Communications ZYWALL USG 2000 Support Notes page 12

Configure ZyWALL 1050 with Static IP address:
ZyWALL 1050 uses the static IP address for VPN connection. The topology is shown on the
following figure.
User needs to configure the static IP address and then apply to the VPN Gateway
configuration page. The configuration steps are stated below:
1) Login ZyWALL 1050 GUI, setup the ge2 interface for internet connection and manually
assign a static IP. The configuration path in ZyWALL 1050 is Network > Interface >
Ethernet >Edit > ge2
2) Switch to VPN > IPSec VPN > VPN Gateway select interface ge2 as My Address and
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
1
12