ZyXEL Communications ZYWALL USG 2000 Support Notes page 49

ZyWALL USG 2000 Support Notes
4) To create a VPN rule, go to VPN > IPSec VPN > VPN Connection. Check the "Use
Policy Route to control dynamic IPSec rules." as defined in step 1 and step 2. Remote
policy should be a dynamic host address. We put VPN Gateway as dynamic as was defined in
step 3.
5) Go to remote host to configure ZyXEL VPN Client. We create a Net Connection set remote
access subnet to 192.168.2.x.
In My Identity, select local ID type as Any.
49
All contents copyright (c) 2008 ZyXEL Communications Corporation.