MAC Filter: 00:0E:35:4F:85:15
WPA and Pre-shared Key
First, you must check whether the wireless card is installed in your device and can be detected
by ZyWALL USG 2000. In the following figure, you can see the wireless card, ZyXEL
G-170S, has been installed and detected by ZyWALL USG 2000.
Next, you need to activate the WLAN service in ZyWALL> Network> Interface> WLAN.
Click the Edit icon to configure the details for WLAN. Please make a copy of parameters in
WLAN. For instance, SSID, Security setting and IP assignment etc. Those information will
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
144