ZyXEL Communications ZYWALL USG 2000 Support Notes page 149

2.4.1.1 Configuration procedure
Install 3G card
Setting parameters 3G card in ZyXEL USG 2000
Step 1. Plug the 3G card to ZyWALL USG 2000's card slot before powering on the ZyWALL
USG device.
In this figure, it shows the 3G card, Sierra Wireless AC850, has been installed in ZyWALL
USG.
Step 2. Login the GUI. After the system boots up, you can see the 3G card information on the
home page. Make sure there is no "Error" message in "3G Card IMEI" and "SIM Card IMSI"
fields. Otherwise, you need to re-install the 3G card and the SIM card and make sure they are
properly installed. Please refer to the quick start guide if you need to troubleshoot because of
an error message.
Step 3. Click the GUI menu ZyWALL> Network> Interface> Celluar.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
149