ZyWALL USG 2000 Support Notes
Setup the routing
The routing source and destination address options will auto-grant from address object. The
policy or static route can't be correctly setup until the corresponding address object is not
configured.
Step1. Switch to ZyWALL > Object > Address > Address and you will find there exists
default LAN_SUBNET address object.
Step.2 ZyWALL will automatically route the traffic between all connected interfaces. There
are default policy routes for LAN and DMZ zone traffic going out to the network behind
WAN.
Switch to ZyWALL > Network > Routing > Policy Route or Static Route to check the
routing settings.
User can click the "Edit" icon to check the detail settings
107
All contents copyright (c) 2008 ZyXEL Communications Corporation.