ZyXEL Communications ZYWALL USG 2000 Support Notes page 115

The configuration on the Master
WAN= 59.124.163.155
WAN Manage IP= 59.124.163.150
LAN= 192.168.1.1
LAN Manage IP = 192.168.1.2
The configuration on the Backup
WAN= 59.124.163.155
WAN Manage IP = 59.124.163.151
LAN= 192.168.1.1
LAN Manage IP =192.168.1.3
1.5.2.4 Steps to configure
In this figure, it shows that current setting of interface in WAN1 and LAN1. You will need the
information to use in the configuration of device HA.
Configuration on the Master
First, we decide one gateway as master router. Therefore, you enable the Device HA and then
configure it as master router in the tab of "Active-Passive mode (AP mode)"
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
115